Official distributor in Russia and CIS countries
HII liquid pump model 3L-SS-41
HII liquid pump model 3L-SS-41
HII pump model 3L-SS-41 technical data
HII pumps model selection chart| Parameter name | Minimum value | Operating (recommended) range | Maximum value |
|---|---|---|---|
| Discharge pressure | 0 bar | 40 - 424 bar / 4,0 - 42.4 MPa | 424 bar / 42.4 MPa |
| Flow rate | 0 l/min | 0 - 0.33 l/min | up to 1.6 l/min |
| Drive type | pneumatic / hand (modification H/HS), single air drive section | ||
| Pump section type | single plunger | ||
| Area ratio | 41 | ||
| Volume displacement per cycle | 3.3 ml/cycle | ||
| Air drive pressure required | 2 bar | 6-8 bar | 10.3 bar |
| Test piece prefill speed | up to 0.33 l/min |
up to 1.6 l/min | |
| Pressure build speed in a prefilled test piece | 0 bar×l/s | 0 - 47 bar×l/s | up to 393 bar×l/s |
| Inlet pressure requirements | free flow | 2 - 10 bar - recommended | up to 424 bar |
| Temperature limitations: drive section | -12 °C - for basic model | -3 °С ... +3 °C - recommended dew point | up to + 65 °C - for basic model |
| Hydraulic body | 316 SS |
| Hydraulic plunger | 316 SS |
| Inlet check valve | 316 SS |
| Outlet check valve | 316 SS |
| Static O-rings | BUNA-N - basic model; Viton - modifications |
| Plunger seal | UHMWPE |
| Inlet liquid port | 3/8" NPT |
| Outlet liquid port | 1/4" NPT |
| Air drive port | 1/4" NPT |
Pumped liquids - various modifications.
- Plain water, water with Water with soluble oil, water with water with corrosion inhibitors;
- Distilled, Deionized water;
- Hydraulic Fluid - Petroleum, Water, or Veg. Oil Based
- Industrial oils, hydraulic oils, aviation oils, mineral oils, synthetic oils
- Hydraulic fluid - skydrol or brake fluids;
- Hydrocarbons, solvents;
- antifreeze, ethylene glycol, non-freezing liquids;
- High purity liquids;
- Explosive and fire-hazardous liquids;
- Chemically active, aggressive liquids.
Please specify the modification when ordering the pump for the pumped liquid and operating conditions.
