3G-SS-20-O-H high pressure hand driven oxygen O2 booster

High pressure hand driven oxygen O2 booster 3G-SS-20-O-H - General Information

The 3G-SS-20-O-H booster has found widespread use in diving and scuba diving, extreme sports, emergency services, and life-support systems for oxygen recharging.

The hand-driven booster 3G-SS-20-O-H is designed to boost oxygen from a cylinder.

Hand drive will allow boosting oxygen from a cylinder or oxygen generator to the container to be charged. If an external source of supply air is available, a pneumatic compressor drive is advisable. This does not require additional switching or modification of the compressor design.

Compressor is very easy to operate - plug and play. No start-up, no specialized installation work required.

The HII oxygen compressors are manufactured in accordance with ASTM G93-96 and CGA-4.1 cleanroom standards.

The design eliminates the use of lubricants, which is critical to the safety of oxygen operations.

The pneumatic drive on the compressor unit allows smooth control and maintenance of the pressure at the desired level without the need for electrical automation.

The design and manufacturing process of the compressors ensure that the purity of the gas is maintained when charging the cylinders.

NOTE: When oxygen is pressurized, maximum safe discharge pressure is limited to 360 atmospheres

At higher pressures, the stainless steel of the equipment becomes a combustible material.

Technical data for 3G-SS-20-O-H

• Combined manual and pneumatic drive
• Manual drive: pressure up to 138 bar
• Pneumatic: pressure up to 238 bar
• Oxygen compartment cleaning in accordance with ASTM G93-96 and CGA-4.1.
• Dry, non-lubricated gas section;
• Pneumatic actuator supply pressure range: 2-10 bar;
• Minimum oxygen inlet pressure of at least 20 bar
• Pneumatic actuator feed: 2-10 atm (0,21,0 MPa) industrial air, nitrogen;
• Air-drive feed: 2-10 bar
• Capacity based on compressor operating conditions: inlet pressure, discharge pressure, drive type and compressor speed
• Infinitely variable discharge pressure
• Oxygen compressor section cleaned in accordance with ASTM G93-96 and CGA-4.1.

Benefits

• The world's only manually-operated oxygen compressor model;
• Totally clean gas train design - no grease;
• No contaminants in the gas train
.
• No gas contamination - perfect for pumping high-purity gases
• Ideal for charging, constant pressure, recharging;
• Unlimited capacity for all types of gases.
• Unlimited number of start/stop cycles - designed to withstand harsh cyclic loads
• Controls: infinitely variable, simple, wide 0 - MAX range
• Built-in safety caps
• Fire and explosion-proof
• No electronics;
• Compact and lightweight - mobile solution.

limitations

• Low capacity compressor;
• Compressor is a booster: inlet gas pressure must be at least the minimum required for compressor operation;
• Compressor is not designed for high-pressure applications.
• It is not intended for pumping polluted gases, gases with mechanical impurities

Types of gases

• High purity technical oxygen
• Ultra-pure oxygen
• Oxygen marks 3.5; 5.0; 6.0
• Laser oxygen
• Medical Oxygen

And other gases:

• High- and ultrahigh-purity gases: hydrogen, nitrogen, helium, argon, krypton, xenon, grades 5.5, 6.0;
• Breathing gases: oxygen, nitrogen, air, breathing mixtures, Nitrox;
• Searching gases: hydrogen, helium;
• Hazardous, flammable, explosive gases;
• Hydrocarbons other than acetylene: natural gas, synthesis gas, propane, butane, methane, ethylene, carbon monoxide, associated petroleum gas;

Seller liability

Oxygen booster compressors and units based on them are high-risk machines.

Each request for this type of equipment is considered on an individual basis by our highly-trained specialists.

Each customer request is validated against 100+ items on our questionnaire based on our experience with the equipment.

If you would like to order a compressor, simply send us a request using any of the convenient methods on our site.

Our specialists will work with you to select a solution to meet your needs.

The customer cannot make their own selections.

We reserve the right to refuse to sell equipment if there is any doubt about the suitability of the equipment for your application.